background image

3.2. Ceiling installation

- Appoint the location of the ceiling mount brackets fixing points.
- Drill holes for anchors fixing the screen brackets to the ceiling.
- Fix the ceiling brackets with anchors (see picture 1). 
     

- Slide screen fixing bolts into the casette chanels (see Picture 2).
- Twist the screen casette and slide the chanel onto the ceiling brackets front hinge (see Picture 3).
- Twist the screen casette back to the horizontal position (see Picture 4)
- Slide locking bolts to the lock position (see Picture 4).

 6

min.  100mm

3.3. Wall installation

- Appoint the location of the ceiling mount brackets fixing points.
- Drill holes for anchors fixing the screen brackets to the ceiling.
- Fix the screen wall brackets to the wall with anchors (see Picture 5).

     The mounting screws diameter should be 

Ø

6 mm. In case of the cartboard-plaster ceiling installation, use cartboard- 

      plaster dedicated steel anchors with 

Ø

6mm diameter screws.

Picture 1  Fixing screen ceiling brackets

Picture 2  Screen ceiling installation - phase 1

D = (3/4W+55)±W/6
W - screen width in milimeters

Picture 3  Screen ceiling installation - phase 2

Picture 4  Screen ceiling installation - phase 3

Check the screen case leveling before first unrolling the screen. 

        Do not use the screen if it is not properly installed (leveled).

Summary of Contents for Cumulus X Tension













Reviews: