AVerTV 6
26
4.7 Removing Unwanted Channels
If you want to exclude undesirable channels from your channel list, do the following:
1.
Click the
Setup
button
and in the
Setup
dialog box, click
Analog TV (or
Programs)
or
Digital TV (or Programs)
icon on the left
pane.
2.
Click
Advance
located in the lower right corner of the
Program Information
section. Then the
Advance
dialog
box will appear.
3.
In the
Program Information
section, select the unwanted
channel and then click
Delete.
This channel will be
removed and that means you won’t be able to access these
programs anymore.
OR,
If you just want to skip a certain channel, do the following:
1.
First, select the unwanted channel in the
Program Information
section.
2.
Clear the
Enable
check box so that you will not access that channel when
you press
Channel Up/Down
buttons.
3.
However, you can still see the channel in your program list. If you want to watch that
channel again at some point, just select the
Enable
check box.
4.8 Using the OverScan Function
On some broadcast channels, you might see distorted
lines or black spaces on the top, sides, or bottom of the
screen. These video artifacts device from the source
signal, and can be masked using the
OverScan
feature.
To hide the edges of the picture:
z
Right-click on the TV Monitor and choose
OverScan
to have it enable it.
OR,
z
Click the
Setup
button
and in the
Setup
dialog box, click
Analog TV (or Programs)
or
Digital TV (or Programs)
icon on the left pane. Enable
Overscan
and specify an
appropriate number (0~20) to get better quality.
