AVERATEC AV6110-EH1 Getting To Know Manual Download

Page: 60 / 74

■

chapter 5 trouble shooting

PC Card / PCMCIA Problems

Note:

Some system may not have the PC Card Slot option.

PC Cards do not function-

Make sure you have properly installed the driver for the card.

Consult the card’s manual or contact the vendor for trouble-shooting.

The PC card cannot be recognized -

Windows NT4.0 does not support PCMCIA (PC Card) function. You may need an external program

for this.

Make sure the card is fully inserted; the outer end of the card should be even with the edge of the

computer.

Remove and insert the PC card again.

Make sure there is no IRQ conflict with the card. See Windows on-line help for solving IRQ conflicts.

Reboot the computer and see if the problem persists.

The card may be defective. Try the card on another system, if possible.

Windows crashes or freezes when you remove the PC card-

Make sure you have <Stop> the PC card before removing it. Double-click the Safely Remove

Hardware icon at the lower right corner of the task bar and select the card you wish to stop. When you click
<Close>, in few seconds Windows will prompt you to remove the card.

5-12

Summary of Contents for AV6110-EH1











































































Search results

Summary of Contents for AV6110-EH1

Reviews:

Related manuals for AV6110-EH1

Brands by name

Popular brands

AVERATEC AV6110-EH1, Getting To Know Manual

Search results

Summary of Contents for AV6110-EH1

Reviews:

Related manuals for AV6110-EH1

Brands by name

Popular brands