manualshive.com logo in svg

AVERATEC AV6110-EH1, Getting To Know Manual

Share
Download
AVERATEC AV6110-EH1 Getting To Know Manual Download Page 6

                                 

■

 chapter 1 getting to know the basics                  

 

Rear View

 

 

 

 

Warning:

 Do not place any heavy objects on the top of notebook. This may damage the display 

 

1.  PC Card Slot (Type II PCMCIA) and Card Eject Button 

The slot is where PC Card (Type II PCMCIA) is inserted. Press the eject button to release the PC Card. 

 

2.  Firewire / IEEE1394 / 1394a Port 

This is a high-speed serial data port. You may connect any Fire-wire-ready device to this port. 

 

3.  Suspend Status LED 

Flashing green light indicates the notebook is in suspend mode. (See the LED Status Indicator Section for 
details.) 

 
4.  Battery Status LED 

The multi-color LED indicates the battery status of the notebook. (See the LED Status Indicator Section for 
details.) 

 
5. Multifunction 

Card 

Reader  

The built-in multifunction card reader allows you to access portable memory devices such as SD, MS, and 
MMC Cards. 

 
6.  Ethernet / LAN Port 

The port connects to a network hub via the RJ-45 cable and also conforms to 10/100Base-TX transmission 
protocol.  

 

7. Modem 

Port 

This is where you plug the phone jack (RJ-11) for fax/modem functions. 
 

 

1-6 

Summary of Contents for AV6110-EH1











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands