13
Setup Shielded Zone
Define the area(s) that
you don’t want the camera to track. The shielded zone(s) should be within the
active zone. 8 shielded zones can be set.
[Note]
The screen of shielded zone setting is based on panoramic camera view.
1. Select
>
Tracking setting
>
Wide Area
>
Select shielded zone
.
2. An online tutorial will display. User can watch to learn how to setup shielded zone. Click
Skip
to
stop tutorial. To watch again, select
to play online tutorial.
3. In the Shielded tracking zone screen, click the
“
+
” and select the area(s) that you don’t want to track
(a gray block will show on the screen). In the example below, you should shield the projector
screen and the TV that may influence tracking. In fact, you should shield all areas where you think
there might be “motion” interference. To delete the shielded zone area, click “
-
“and select the
shield to delete. Or select
“
Reset Shields
” to delete all shields.
4. Select
“
Save
” to save the setting.
