9
Make a Connection to TR320 via AVer IPCam Utility
[Note]
The TR320 FW version 0.0.1000.08 and above supports IPCam Utiltiy application.
To find the IP address of your cameras, you can execute the IPCam Utility installer. Follow the below
steps to find the IP address of camera.
1. Download the IPCam Utility from
http://www.aver.com/download-center
2. Run the IPCam Utility.
3. Click Search, and all available devices will be listed on the screen.
4. Select a camera from the list.
5. The corresponding fields of IP address will display.
6. Double-click on the IP address of camera from the list can connect to camera through the browser.
[Note]
If IPCam utility cannot find the camera, please check following:
1. Please make sure the Ethernet connection of camera is well connected.
2. The camera and PC (IPCam utility) are in the same LAN segment.
