AVer SF2111H-DVR User Manual Download Page 66

Page: 66 / 74

Output Setting:

Mode setting:

OnOff Switch: Relay status is based on sensor triggered times.

Time Switch: To restore the original relay status after the interval time.

[Note]GPIO pin define please refer to the part of Front / Back plane & I/O port pin assignment.

Ground (G)

ALARM INPUT:

Normal: 5V (The voltage differential from ALM_IN pin & Ground)

Active: 0V (Short the pin of ALM_IN and Ground pin)

RELAY OUTPUT:

MAX: 50 mA, DV 5V

Ground(G)

Status Information

Click Apply button to save the configuration.

Networking Info: Displays network information of the IP camera.

Product Info:

Server Name: Assigns a name to the IP camera and the name shows on the IP Installer. Also,

displays the related information of the IP camera. Mark Status Bar to display the Server Name of

IP camera on preview interface.

LED indicator: To disable or enable the LED indicator on the IP camera. Only

SF2111H-BR/DR/DVR has this function

Summary of Contents for SF2111H-DVR











































































Search results

Summary of Contents for SF2111H-DVR

Reviews:

Related manuals for SF2111H-DVR

Brands by name

Popular brands

AVer SF2111H-DVR, User Manual

Search results

Summary of Contents for SF2111H-DVR

Reviews:

Related manuals for SF2111H-DVR

Brands by name

Popular brands