AVer PTZ310, User Manual

Page: 26 / 52

19
System

Camera Selector: Set the camera ID 1~4 for using remote control on multiple cameras control
(also see (2) Camera Select in Remote Control chapter).

Status OSD: Enable/disable Preset status (Save Preset, Call Preset, Cancel Preset) display on
the screen.

Language: Change the OSD language.

NDI:
Enable/disable NDI function. The NDI function is only supported on PTZ310N/330N model.
The camera will reboot when enabling or disabling NDI function. To setup NDI camera ID, please
refer to
NDI Function section.

Latency Reduction: It will cut off Digital zoom, Noise reduction and 720P Resolution option. The
camera will reboot when enabling or disabling function of latency reduction.

Power saving

ON: PTZ can be shoot down. Boot up only through IR remote, RS232 and WOL.

OFF: PTZ set to standby, PTZ can be boot up through IR remote, RS232 and VISCA-over-IP.
System Camera Selector 1~4
Status OSD Off/On
Language English/
日本語
/
繁體中文
/
簡體中文
/
한국어
/Ti ế ng vi ệ t
NDI Off/On
CameraID PTZ330
Latency Reduction Off/On
Power Saving Off/On
Information Model Name/Version/IP Address/MAC
Factory Default Off/On