AVer FD1020 User Manual Download Page 66

Page: 66 / 79

Event > Arrangement > Preference



Record File:



File Format:

IP camera allows 3 different types of recording file to change its record size. When

motion/alarm is triggered, there are 3 different types of record mode.



AVI File (With Record File Setting )



JPEG Files (With Record File Setting), only with MJPEG compression format.



Single JPEG (Single File with Interval Setting) (JPEG photo).



Pre Alarm and Post Alarm:

Setups for video start and end time when motion detected, I/O, or

other devices got triggered.

[Note]

Pre/Post Alarm record time is base on record time setting and IP camera built-in Ram

memory. Limited by IP camera built-in Ram Memory. When information is too much or video

quality set too high, it will cause recording frame drop or decrease on post alarm recording time.



Network Connected:

When the network is down, it will save the video to local SD/SDHC card.

[Note]

This function is only enabled in wire connection.



Network IP check:

When the connection is down, it records the

video

to SD/SDHC card. Make

sure the video recording is continuous. To use this function, key in the IP address of the PC which

has recording software installed. E

nable the function of “

Save to SD card

”, then click “

Apply

”.

Summary of Contents for FD1020
















































































Search results

Summary of Contents for FD1020

Reviews:

Related manuals for FD1020

Brands by name

Popular brands

AVer FD1020, User Manual

Search results

Summary of Contents for FD1020

Reviews:

Related manuals for FD1020

Brands by name

Popular brands