AVer FD1020 User Manual Download Page 39

Page: 39 / 79



Status

Common warning message:

Updating!

Failed(1), Please check your DNS setting.

Failed(2), Please check your internet connection.

Failed(3), Please check your internet connection.

Failed(6), receiving data failure

Warning message from different service provider:



Server Provider : dyndns.org

Failed(4),Please check the Dyndns.org.

Error : The system parameter given is not valid.

Error : No user agent was specified.

Error : The username and password pair do not match a real user.

Error : An option available only to credited users was specified.

Error : Not in the form hostname.domain.org or domain.com.

Error : The hostname specified does not exist.

Error : Not under the username specified.

Error : Too many or no hosts specified in an update.

Error : The hostname specified is blocked for update abuse.

Error : DNS error encountered.

Error : DNS Server Error Conditions.



Server Provider : ddns.camddns.com(TW)

Failed(5), The name has already been registered.



Server provider : ddns.ipddn.com(HK)

Failed(5), The name has already been registered



Server provider : www.3322.org.

Failed(4), Please check the www.3322.org.

Summary of Contents for FD1020
















































































Search results

Summary of Contents for FD1020

Reviews:

Related manuals for FD1020

Brands by name

Popular brands

AVer FD1020, User Manual

Search results

Summary of Contents for FD1020

Reviews:

Related manuals for FD1020

Brands by name

Popular brands