81
Missing Object
Select a certain object on the screen for the camera system to detect; System gives alarm
when the object disappears.
1. Select the
Missing Object
from the drop-down list.
2. A red frame will show up on the screen. Click and drag the red frame to the object position
and click the frame to adjust the size of frame.
3.
Detection Duration:
Set the lasting time for camera system to detect the object.
4.
Alert Duration:
Set the alarm lasting time after alarm has been triggered.
5.
Sensitivity:
Set the degree of response of detection.
6.
Display on OSD:
Mark to enable the missing object frame to display on screen when
missing object has triggered
.
Summary of Contents for E5016
Page 1: ...E5000 series E5016 E5016H User Manual V 2 3 1 3 ...
Page 58: ...49 2 6 2 4 Setup Network Port Assign a Network Port for remote accessing connection ...
Page 70: ...61 2 8 Camera Management Connect and configure the IP camera Click Setup tab Camera Setting ...
Page 113: ...104 13 To delete the alarm select the alarm that user wants to delete and click Delete button ...
