103
9. In System section, mark the check box to set the conditions that are caused by system.
-
Reboot:
when the NVR/DVR system reboot without abnormal condition, the system
will send out the alarm message.
-
Abnormal Reboot:
when the NVR/DVR system reboot in irregular condition, the
system will send out the alarm message.
-
Hard Disk failed:
when the hard disk doesn
’t work normally, the system will send out
the alarm message.
10. After setting all alarm conditions, click
Apply
to save the settings.
11. Next, user needs to set the alarm action when alarm has triggered. Please refer to
12. To modify the alarm condition setting, click
Setting
button of Alarm # that user has created.
Remember to click
Apply
to save the changes after modification.
Summary of Contents for E5016
Page 1: ...E5000 series E5016 E5016H User Manual V 2 3 1 3 ...
Page 58: ...49 2 6 2 4 Setup Network Port Assign a Network Port for remote accessing connection ...
Page 70: ...61 2 8 Camera Management Connect and configure the IP camera Click Setup tab Camera Setting ...
Page 113: ...104 13 To delete the alarm select the alarm that user wants to delete and click Delete button ...
