106
4. The
No.
,
Name
,
Description
, and
Priority
column display the current alarm
’s information.
The T
rigger Type
displays the current alarm
’s trigger condition.
5. In
Alarm Reset
section, click the camera number to set the reset condition of alarm. Once
alarm is reset, all alarm action will stop at the moment. If the sensor normal status is high,
set the alarm reset condition to low.
-
IP Camera Sensor:
To adjust sensor high/low that is connected on the IP camera.
-
Alarm Reset Time:
Set a time for the alarm auto reset. When an alarm happen such
as motion detected and video loss, the alarm will reset at the alarm reset time.
6. In
Action
section,
user may now set the alarm action for the system to perform when the
alarm condition is activated.
-
Launch E-Map:
Display mini E-map on the screen.
Summary of Contents for E5016
Page 1: ...E5000 series E5016 E5016H User Manual V 2 3 1 3 ...
Page 58: ...49 2 6 2 4 Setup Network Port Assign a Network Port for remote accessing connection ...
Page 70: ...61 2 8 Camera Management Connect and configure the IP camera Click Setup tab Camera Setting ...
Page 113: ...104 13 To delete the alarm select the alarm that user wants to delete and click Delete button ...
