85
4.1.1.6
Switching to 485 CMS Mode
When the System Controller is connecting with CMS server through the 485 port, the System
Controller mode should be in
485 CMS
modes in order to operate the CMS system. If the mode is not
485 CMS mode, please follow the below steps to switch to 485 CMS mode.
i
-
The default mode is USB CMS mode
-
The 485 PTZ mode is not supported for CMS server.
-
Please remember to setup the System Controller model as
System Controller Pro
485
in CMS system.
1.
In main menu, press
and select
(system controller setting).
2.
In System Controller setting screen, select
.
3.
In Mode screen, select the
. If the current mode is 485-CMS mode already, then the
selection will not show in selection list.
4.
Press
button to confirm. To cancel the selection, press
button. When the
“
Complete
” message appears on the LCD screen, the mode switch is completed.
Current System
Controller Mode
