www.avenview.com
Page
8
5
.
GENERAl TRouBlESHooTING
PROBLEM
POSSIBLE SOLUTION
THE WIRELESS OR VIDEO
LINK LED IS NOT LIT
•
Make sure the units are within the recommended distance (50
meters)
(OFF 30 sec then ON).
•
Reduce the distance between the Transmitter and Receiver units.
power cycle both extender units
(OFF 30 sec then ON).
NO POWER
•
Re-check all connections and verify they are in the correct
positions and verify the units are powered
with the provided
adapter
.
IR NOT RESPONDING
•
Check the IR Extender cable is connected to the Transmitter unit
•
Check that the IR
window
is visible and not being obstructed
and the
transmission of IR from the remote can be sent.
•
Reposition the IR flasher to another location near the IR port of
your source device
NO IMAGE
IMAGE INTERFERENCE
IMAGE NOT CLEAR
•
Reduce the distance (less than 1 meter) between the transmitter
and receiver units and then reconnect power adapter.
•
If no picture after Step 1, press
RESET
button on
EITHER the
TX or RX
•
If no picture after Step 1 and step 2,
power off units for 2 minutes,
reconnect power and press RESET on BOTH TX and RX.
