www.avenview.com
Page 3
2.
INTRODuCTION
The Avenview HBT-C6pOE-SET HDBaseT Extender set CAT5/6/7 with pOE, Bi-Directional IR, RS232 and Ethernet has been
designed to extend High Definition video and multi-channel digital audio formats to any HD Monitor.
Video Signals: 4k2k@30 (ultra HD), 3D, 8/10/12 Deep Color, and full HD 1080p@60 Hz/36-bit color depth.
Audio signals: lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD).
Data Signals: Bi-Directional IR signals 30 kHz to 50 kHz over CAT5/6.
The HBT-C6pOE-SET includes two (2) units: Sending unit (TX) HBT-C6pOE-S and Receiving unit (RX) HBT-C6pOE-R with
one (1) uTp output port which allows the user to extend video and audio up to 100m (330ft). The HBT-C6pOE-SET also allows
bi- directional IR control of the source connected to the unit from the users IR remote control at the monitor side.
The bonus features with this device it can be powered by the 24V from the TX poE (power over the CATx cable to the RX)
also Internet (100Mbps Ethernet service when connected to a Router). These features has been added to this unit to give the
installer and user a complete solution with the new trends in online streaming, network connected devices and new demand in
Smart TV, ultra HD monitors and content.
- Input: HDMI with 3D & 4kx2k, 1080p,HDCp and DVI compliant
- Video bandwidth: from 300MHz / 9 Gbps
- pc resolutions: up to VGA to WuXGA
- HD resolutions: up to 4kx2k (3840x2160@30Hz and 4096x2160@24Hz)1080p (1920x1080@60Hz)
- Audio supported: lpCM 7.1CH, Dolby TrueHD, Dolby Digital plus and DTS-HD Master Audio
- Audio transmission: (32-192kHz sample rate)
- Supports: CEC bypass
- Distance: up to 100 meters through CAT6e/6a/7 cables
- Ethernet transmission: Rate up to 100Mbps
- uncompressed video: 1080p, 60 Hz, 36-bit
- Service: uSB for Manufacturer uSE ONly
- 3D support: follow by Display / TV’s EDID
- 5play™ convergence: HDMI, lAN, poE & Bi Directional Control (IR & RS-232)
NOTE:
- The poE function is designed for powering compatible Receiver units only.
- The non-poE Receivers has to be powered with a power supply.
- Receivers (Rx) from different manufactures would not be compatible.
- Displaying HDMI 4kx2k resolution would require the standard 4kx2k HDMI cable and display for accurate results.