Aventics Marex 3D 531, Assembly Instructions Manual

Page: 21 / 28

Disassembly and replacement
AVENTICS | Joystick Type 531 | R417003072–BDL–001–AA 21
Eng
lish
9 Disassembly and replacement
Proceed as follows to dismantle the Joystick Type 531:
1. Switch Marex 3D off.
2. Make sure the Joystick Type 531 is powered off.
3. Remove the electrical connections at connectors X11 and
X12 (see chapter 7.3, Connecting the Joystick Type 531).
4. Loosen the mounting nuts. You may now remove the
Joystick Type 531 from the control panel.
10 Disposal
Dispose of the packaging in an environmentally compatible way.
CAUTION
Risk of injury and property damage when servicing
components under power
O
If you dismantle or replace the Joystick Type 531 while
Marex 3D is in operation, the ability to steer may be lost.
Components may be destroyed if connections are
removed under power.
O
Only perform assembly or disassembly work on
electrical connections if the Marex 3D system is powered
off.
NOTICE
Environmental damage due to improper disposal
Electronic components require special waste treatment and
must only be disposed of by approved specialist companies.
O
Dispose of electronic scrap in an environmentally sound
way. Consult the responsible local authorities regarding
the environmentally sound disposal.