Aventics Marex 3D 531, Assembly Instructions Manual

Page: 16 / 28

Assembly
16 AVENTICS | Joystick Type 531 | R417003072–BDL–001–AA
7.1 Installation conditions
The mounting bolts are suitable for a panel thickness between
2 to 30 mm.
The mounting depth for the electric plugs and connections
below the console or panel is 140 mm approximately.
O
Install the Joystick Type 531 in such a way that its moving
range is not restricted by other components and all
operating and indicating elements are visible and can be
easily operated at all times.
A circumferential sealing is provided around the Joystick
Type 531 to seal its edge to the panel surface.
O
Make sure that no bores or gaps in the panel surface are
located in the sealing area as otherwise the tightness of the
panel can not be guaranteed.
O
Use an elastic sealant in addition when installing the
Joystick Type 531 on panels which are uneven or have a
rough, structured surface. This prevents the penetration of
water into the panel.
7.1.1 Mounting orientation
Always install the joystick in forward direction with the stick
pointing upward.