7
ATTACHING AND REMOVING THE WHEELS
Lift the rear of the frame enough to allow you to insert the hub axle into wheel axle of the trailer.
Insert the hub axle all the way by pushing on the hub until you hear an audible click. Check that the
axle is secured and inserted fully by grabbing the center of the hub and pulling away from trailer.
To remove the wheel, press the buttonhook underneath near the axle tube while pulling the wheel
away from trailer.
WARNING
For easy towing and safe handling, check tires often for proper inflation and wear.
Check tire pressure regularly and inflate tires to within the range shown on the tire sidewall.
ATTACHING THE REFLECTORS
Screw the reflectors on the rear of trailer and the spoke reflector on both sides of wheels.
Make certain to tighten these screws securely.
CAUTION
The reflectors that comply with the homologated regulations shall be visible on the rear of the trailer.
WARNING
Never use the trailer at night without adequate lighting and reflectors, obey all local legal
requirements for lighting and reflectors. The lighting and reflectors should be complied with the
homologated regulations.
