background image

5

FOLDING AND UNFOLDING OF THE TRAILER

Remove trailer and all components from carton and sort all contents. Unfold the retractable mesh 

canopy of trailer by hand to the upright position.  Insert the safety pins into the bottom sleeves.  

Operate it in the opposite order to fold the frame.

                 

      

           

 

CAUTION

The seat is not suitable for children under 12 months.

Ensure that the safety pins are secured with the spring clips.

                      

WARNING

Immediately discard all plastic bags and plastic wrapping materials.

To prevent injury, please use extreme care when folding and unfolding the trailer.

OPENING & CLOSING THE CANOPY OR RAIN COVER

The retractable mesh canopy is designed to protect passengers and for passengers from flying 

debris.  The PVC wind/rain cover is designed to keep passengers and cargo dry and warm in 

inclement weather. 

Open and close the canopy with Velcro straps in front of trailer.  Adjust the height of opening of 

canopy with the strap.  Position the wind/rain cover over top of trailer.  Fasten the wind/rain 

cover with elastic straps at corners and work it until it is fully covering the trailer.  Operate it in the 

opposite order to remove the cover.  The wind/rain cover can be placed in the rear compartment. 

                 

CAUTION

It is strongly recommended that children’s eyes are protected from flying insects and airborne 

particles when pulling trailer.  Suitable protection includes: 

SUNGLASSES, EYE GLASS, INSECT SCREEN OR PVC WINDOW ON THE CANOPY.

      

      

  

    

     

  

Summary of Contents for Dome Trailer











Reviews: