28
Mighty Scope
5M
Instruction
Manual
Measuring - calibration
(Mac)
1. Place a scale under the camera and adjust the
focus knob until the image is sharp
(Fig. 59)
.
2. Click the “Snapshot” button to capture the
picture, double click this picture in the list bar.
3. Click the “Measurement” button to open the
Measurement Window.
*You must calibrate again if you change the distance,
magnification, or resolution.
4. Check “Calibrate” box, and choose the
“Reference Unit” that matches your scale
and is the largest dimension visible on your
snapshot.
(i.e. The largest dimension available
between 3 centimeter and 3.5 centimeter is 5
millimeter. Therefore, we choose the 5mm as the
“Reference Unit”)
5. Click and hold the mouse button at the 3
centimeter line and drag the cursor to the 3.5
centimeter line
(Fig. 60)
.
6. Release the mouse button, and the calibration is
complete.
(Fig. 61)
.
7. Now you can begin measuring. Double
click the picture in the list bar or just place
the microscope on the object and click the
“Measurement” button.
8. Click the to return to live mode.
FIG. 59
FIG. 60
FIG. 61
