- 46 -
G
INTERNAL VIEW AND CONNECTION TO THE PORTABLE TELEPHONE
Note 8: The figure shows the connection to the portable telephone which is very easy and
fast; the first operation to be performed is to replace the original battery which is
usually supplied with the portable telephone with the battery seated inside the dialler.
Then provide the portable telephone base with the control connector.
Tamper alarm
The enclosure is provided with a NC 50 mA/60Vdc contact (TAMPER) against the opening of
the envelope and its removal.
The tamper alarm signal is not transmitted to the control panel by the dialler, however it is
possible to collect the tamper alarm signal, coming from the TAMPER contact, through a
connector seated on the card (see picture above), and to transmit it to the control panel by
means of a detector code AF913R or AF913R-M.
1
2
3
4
5
6
7
8
9
0
#
F
INST JP1 UT
INST JP1 UT
CONNETTORE
TAMPER
Battery connector
TAMPER
CONNECTOR
C.415 10-06-2002 9:11 Pagina 46
