- 30 -
G
4) Transmission (operating cycle) in progress. The transmission condition (operating
cycle) in progress is indicated by the LCD through the following mention (during all the
operating cycle):
Microphone and loudspeaker
The microphone and loudspeaker, which are seated under the central slotted area, allows to
record the alarm message and to listen to it more than once.
PROGRAMMING
The power supply connection (that is branching the connector of the lithium battery) to the
dialler makes the AVE SPA mention be displayed.
After 10 seconds, the dialler enters the stand-by condition awaiting the code to enter pro-
gramming.
To enter the programming for the first time, use the FACTORY CODE. Then use the pre-set
USER CODE.
The programming exit is made automatically after 60 seconds after pressing the latest key
(TIME-OUT exit) or by pressing key ”X”.
After entering the user code, you can enter the programming of NUMBERS or FUNCTIONS.
Keystroke the user code:
TRASMISS
TRASMISS
Signal of transmission (operating cycle)
in progress
0000
0000
The factory code allows to enter the program-
ming on connecting the device for the first time
and for a period of 30 seconds.
Before any programming, set the user code by
using function 3 (page 36).
1
st
time Factory Code (0000), afterwards User
code = programmed.
NUMERI
NUMERI
FUNZIONI
FUNZIONI
AVE SPA
AVE SPA
Programming exit and stand-by condition achie-
vement.
✆
✆
F
F
✗
✗
C.415 10-06-2002 9:11 Pagina 30
