Avaya VSU 10000, Administrator'S Manual

Page: 17 / 44

Introduction 1-7
VSU-10000 User Guide
Required Equipment
The VSU-10000 shipping carton should contain:
To install and use the VSU-10000 in a typical network, the customer must
supply:
• Router providing connectivity to a WAN such as the Internet
• 10/100/1000BASE-T Ethernet hub, router, or switch providing connectivity
to a LAN
• CAT 5 UTP cable to interconnect router, VSU-10000, and hub(s)
• An asynchronous ASCII terminal supporting RS-232 or a PC running
terminal emulation software to provide initial IP configuration (IP address,
subnet mask, default router)
• PC workstation to run VPNmanager network management application
Required Tools
The VSU-10000 chassis can be mounted in a standard 19-inch equipment rack.
Rack mounting requires a Phillips-head screwdriver, the VSU rack mount
bracket kit, and four screws to match the rack. (Screws for attaching the
mounting brackets to the chassis are provided.) Instructions for rack mounting
are provided in the section “Rack Mount” on page 2-1.
Quantity Part Description
1 VSU-10000 VPN Service Unit
1 VPNos CD ROM
2 Redundant power supply modules
1 UTP Crossover Cable (for connection to a router, switch, or hub)
1 Null Modem Cable (for connection to the VSU Console port)
2 Power cord (110V) or Power cord (230V)
1 Rack mount kit including two mounting brackets and screws for
attaching the brackets to the VSU-10000. Hardware required to mount
the unit to the rack must be provided by the customer.
4 Rubber feet for desktop installations