Avaya M770 User Manual Download Page 34

Page: 34 / 87

Chapter 4

Avaya M770 ATM Manager User Guide

Editing Severity Degrees

Severity degrees may be changed for faults on a system-wide basis, or for
specific devices (per IP).

CAUTION

Do not change the Event Object Identifier of a fault.

Editing
Severity
Degrees
System-
Wide

To edit severity degree settings system-wide:

1. Select the enterprise which contains the fault whose settings you

want to edit. A list of the faults under the enterprise appears in the

Event Identification

window.

2. Select the fault whose settings you want to edit.

3. Select

Edit >

Modify Event

Double-click the fault whose settings you want to edit. The Event
Configurator window opens.

4. Change the severity setting using the

Severity

pull-down list.

5. Click

6. Save the changes.

—

In HP OpenView and NT-OV, Select

File >

Save

—

In NetView, Click

Apply

Editing
Severity
Degrees for
Specific
Devices

To edit severity degree settings for specific devices:

1. Select the enterprise which contains the fault whose settings you

want to edit. A list of the faults under the enterprise appear in the

Event Identification

window.

2. Select the fault whose settings you want to edit.

3. Copy the fault by selecting

Edit >

Copy

Event

. The Event

Configurator window opens.

4. Enter a name for the fault in the

Event Name

field.

5. Set

Source

to the IP address/es of the specific device/s you want the

changes to be effective on.

6. Change the severity setting using the

Severity

pull-down list.

Summary of Contents for M770
























































































Search results

Summary of Contents for M770

Reviews:

Related manuals for M770

Brands by name

Popular brands

Avaya M770, User Manual

Search results

Summary of Contents for M770

Reviews:

Related manuals for M770

Brands by name

Popular brands