Avaya M770 User Manual Download Page 24

Page: 24 / 87

Chapter 3

Avaya M770 ATM Manager User Guide

Viewing the Virtual Port Table

The Virtual Port Table provides a consolidated view of all of the virtual
ports on the Avaya M770 ATM Device. To view the Virtual Port Table:

Click .

Select

Configuration >

Virtual Port Table

The Virtual Port Table

opens.

Figure 3-4. Virtual Port Table

The Virtual Port Table provides information such as the source port and
module, statuses, signalling and termination types, and neighbor
information for each virtual port. You can add, edit, and delete virtual
ports in the Virtual Port Table.

* Note: The

Admin Status

must be set to

disable

to edit or add a virtual

port. For more information about changing the

Admin Status,

refer to “Editing a Virtual Port” on page 19.

For a full description of the fields in the Virtual Port Table, refer to
Appendix B, Configuration Fields.

Summary of Contents for M770
























































































Search results

Summary of Contents for M770

Reviews:

Related manuals for M770

Brands by name

Popular brands

Avaya M770, User Manual

Search results

Summary of Contents for M770

Reviews:

Related manuals for M770

Brands by name

Popular brands