•
Left
arrow key
1
6. Press one of the following:
2
•
Save
3
•
OK
4
Note:
If you do not want your phone to restart and stay in the Manual mode when you switch
5
Network config
from
Auto
to
Manual
, press
Save
.
6
If you switch
Network config
from
Manual
to
Auto
, press
Save
and then do either of
7
the following:
8
• If the currently-connected network is the same as the pre-configured network that
9
your administrator has set up, the phone will not restart and stay in the Auto mode.
10
• If the currently-connected network is not the same as the pre-configured network
11
that your administrator has set up, the phone will prompt you for permission to
12
restart before connecting to the pre-configured network.
13
Connecting to a Wi-Fi network
14
About this task
15
Use this procedure if your phone is not configured to connect to a specific Wi-Fi network.
16
Before you begin
17
• Ensure that the system administrator gave you access to perform this task.
18
• Select Wi-Fi as your network mode.
19
• When you set the network mode, note the SSID, as this is the name of the Wi-Fi network that
20
the phone will attempt to connect to.
21
• Depending on the type of security in the Wi-Fi network, obtain the required credentials.
22
Contact your system administrator for more details.
23
Procedure
24
1. Press
Main Menu
.
25
2. Scroll to
Settings
and press
Select
.
26
3. Scroll to
Network
and press
Select
.
27
4. To access the list of available Wi-Fi networks, scroll to
Wi-Fi network
and press
Select
.
28
5. Scroll to the required
Wi-Fi network
and press
Connect
to start the connection process.
29
6. To restart the phone, press
OK
.
30
7. If the security is WEP or WPA/WPA2 PSK, in
Password
, enter the password for the Wi-Fi
31
network.
32
Setting the network mode
October 2022
Using Avaya J189 SIP IP Phone in Avaya Aura
®
27
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—October 5, 2022—8:17 AM (UTC+00:00)
