Introduction
General - Page 3
Introduction
General
This manual covers the installation, maintenance and programming of an INDeX
Cordless Subscriber Line Cassette (CSLC) DECT system operating with software
Level 2.2+. It is intended for use by installers and maintainers who have successfully
completed an appropriate INDeX DECT training course.
The CSLC provides digital connection directly into the INDeX and provides the
system with integrated support for cordless handsets. The CSLC is both DECT and
GAP compatible
Base Stations
(max. of 16)
Repeater
(one per Base Station)
Slave Jack Socket
(not supplied)
2km Single Twisted Pair Cable (not supplied)
Up to 128 Handsets
With a max. of 4 simultaneous
calls per Base Station
MDF
INDeX with CSLC
INDeX 32 Pair Cable
There are two variants of CSLC cassette. The CSLC 8 supports up to 8 base
stations and 64 handsets. The CSLC 16 supports up to 16 base stations and 128
handsets. Each base station can handle up to 4 simultaneous calls. Repeater base
stations can be used to extend the range of system coverage.
Only one CSLC cassette can be installed in an INDeX system and both cassettes
handle a maximum of 32 simultaneous calls
INDeX DECT conforms to the DECT Generic Access Profile (GAP) requirements.
This allows other GAP handsets to be used on the system (only INDeX handsets
can utilize the full feature set of INDeX). It also allows the INDeX DECT handsets to
be used on other GAP compatible DECT systems
–
Approvals:
–
Electric:
TBR 6 (DECT RF)
–
Access Profile:
TBR22 (GAP) Layer 1
–
EMC:
ETS 300 329 (CE Labelling)
Note:
For both the Hot Desk Working and Multi-site Roaming features (see pages
20 and 21 respectively) to operate, the following software must be installed:
– INDeX Level 9.2+
– CSLC Level 2.2+
– 20DT Handset Level 2F+ (see page 6)
Installation Manual
Page 3
INDeX CSLC
38DHB0002UKCA – Issue 8 (26/03/2002)