Avaya INDeX CSLC, Installation Manual, Page: 15 / 28

Installing DECT Base Stations (DBS) Page 15
Installing DECT Base Stations (DBS)
Correct positioning of Base Stations is vital to the performance of the whole
system. Before installing any DECT Base Station, ensure that you have
accurate plans for its location. If possible consult with the person who
performed the site survey.
Before installing any Base Station check the PCS levels shown on its labels. All the
Base Stations within a system must have the same PCS levels.
Note that software level PCS 3+ base stations can be installed up to 2km (1km for
older style units) from the CSLC.
CLSC to MDF Connections
The table below shows the connections from the CSLC cassette's 32-pair cable to
the MDF panel. It is recommended that you connect all 32 pairs even if the
installation does not require all 32. This allows for system expansion and
maintenance with the minimum of cable rewiring
Ensure that the cable and wires are clearly labelled at both ends.
Base Station Wrap Speech Speech
Base Station 1 Orange White/Blue Blue/White
Base Station 2 Orange White/Orange Orange/White
Base Station 3 Orange White/Green Green/White
Base Station 4 Orange White/Brown Brown/White
Base Station 5 Orange White/Slate Slate/White
Base Station 6 Orange Red/Blue Blue/Red
Base Station 7 Orange Red/Orange Orange/Red
Base Station 8 Orange Red/Green Green/Red
Base Station 9 Orange Red/Brown Brown/Red
Base Station 10 Orange Red/Slate Slate/Red
Base Station 11 Green Black/Blue Blue/Black
Base Station 12 Green Black/Orange Orange/Black
Base Station 13 Green Black/Green Green/Black
Base Station 14 Green Black/Brown Brown/Black
Base Station 15 Green Black/Slate Slate/Black
Base Station 16 Green Yellow/Blue Blue/Yellow
Installation Manual Page 15
INDeX CSLC 38DHB0002UKCA – Issue 8 (26/03/2002)