background image

avaya.com

8

• The Navigation Pane on the left side of all screens 

contains a list of links to the screens for managed 
objects.

• The main menu is displayed in the working pane on 

the right side of the main screen. The entries on the 
main menu are shortcuts for the most frequently 
used functions.

The Profile-Based Setup Assistant

A profile contains the main parameters required to 
configure the i120. All you need to do is follow the 
steps in the assistant to complete the configuration. 
You should have the data available prior to installation 
to provide the remaining parameters. Consult your IT 
contact if you do not have all of the information 
available.

The first screen that appears is the Profile-Based 
Setup Assistant home screen.

• Click Start to run the Profile-based Setup Assistant

• The 

Profile-Based Setup Assistant 

is displayed (the 

actual screen may differ from this one). 

Initial Setup Assistant Home Screen.

The Initial Setup Assistant applies to Distributed 
Office i120 solutions that require complete 
configuration and should only be reached if the unit 
was re-initialized. Check your network plan or consult 
your IT professional for help if necessary.

Select either Install from Scratch or Install from 
Profile.

For Install from Scratch:

• Click Start.

• The 

Install from Scratch Assistant

 opens 

For Install from Profile:

• Click Start.

• The Install from Profile Assistant opens.

• Select the Disk on Key (DoK) option or download a 

profile from an ftp site. 

• Either the Local Manager Screen or Profile-Basd 

Setup Assistant will appear.  Refer to steps earlier 
in this guide to proceed.

Summary of Contents for i20











Reviews: