avaya.com
2
Check
Safety
Before you start the installation, refer to the following
safety information
• Grounding. Refer to “General grounding
• Rack mounting. Refer to “Mounting your i120 in a
Installation location
When deciding where to position the i120, ensure
that:
• It is accessible and cables can be connected easily.
• Cabling is away from sources of electrical noise
such as radio transmitters, broadcast amplifiers,
power lines and fluorescent lighting fixtures.
• Water or moisture cannot enter the case of the
i120.
• There is a free flow of air around the i120 and the
vents in the sides of the case are not blocked.
Required equipment
Prepare the tools you need to mount the i120
according to the following table:
• You might also need wire cutters to attach the
grounding conductors, if your site uses a ground
block.
• To configure your i120, you will need a computer
with a screen resolution of 1024x768 pixels or
higher and either Internet Explorer 6.0 or higher or
Mozilla Firefox 1.5 or higher.
Unpack
The Avaya Distributed Office i120 is shipped with the
following items. If any items are missing or damaged,
contact your supplier. Retain the packaging in case
you need to ship the i120.
To mount on...
Prepare these tools
Table
Stylus to fix the feet.
Rack or wall
Phillips head screwdriver.
Flat wall
Screws to fasten i120 to the
wall.
Uneven wall
• Plywood board: 16.3” x
18.3”, 0.8” thick (415 x
465 mm, 20 mm thick).
• Wood screws.
• Screws to fasten the i120 to
the board.
Four rubber feet
One Grounding
Cable Assembly
Power Cord (draw-
ing shows US
power cord)
Nine 5/16"
(8 mm) Flat-Head
Screws
Two mounting
brackets
Summary of Contents for i20
Page 9: ...9 ...
