Avaya ERS 2500, Troubleshooting Manual

Page: 54 / 90

1. Use the
show adac in <port>
command to display the ADAC information for
the port.
2. Note if the oper state is disabled and the number of devices connected.
Reducing the number of devices
Reduce the number of LLDP devices on the system.
1. Follow local procedures and SOPs to reduce the number of devices connected.
2. Use the
show adac in <port>
command to display the ADAC information for
the port to ensure there are less than 32 devices connected.
Disabling and enabling the port
Administratively disable and enable to port to initialize configuration.
1. Use the
no adac enable <port>
command to disable ADAC.
2. Use the
adac enable <port>
command to enable ADAC.
Troubleshooting ADAC
54 Troubleshooting November 2010