IP Office Integration - Page 35
Compact DECT - Installation Manual
Page 35
38DHB0002UKFH – Issue 5 (27th October 2003)
DECT Configuration Software
DECT Configuration Software
With the Site Survey performed (
see page 6
), the Base Station installed and
all DECT handsets Registered (
see pages 13 and 15
), the IP Office DECT
Configuration software can be installed.
DECT Software Installation
The DECT Configuration software is installed from the IP Office
Administration CD and can be installed onto any Windows 95 or higher PC.
Perform the following:
1. On the PC running on the same TCP/IP LAN as the IP Office control unit,
insert the IP Office Administration CD.
2. If the CD Autoruns click
Cancel
and manually open the CD. Select the
DECT folder and click on
Setup.
3. Follow the installation Wizard and when installation is completed, click
Finish.
IP Office Licences
To install the DECT licence, perform the following:
1. From Start | Programs | IP Office, open the
Manager
application. The
default password for Administrator is
Administrator
, however this
must
be changed as early as possible.
2. Open the Configuration Tree (File/Open). The default password for the IP
Office configuration is
password
, however this password
must
changed
as early as possible.
3. Click on the
Licence
icon and, in the right hand field, right click and select
New
4. Enter a valid Licence string for the Compact DECT (obtained from your
supplier). The DECT Configuration Licences are for 8, 16 or 64
extensions.
IP Office User Configuration
A fixed range of analogue extensions (
Users
) must be allocated to DECT
handsets. Each
User
assigned to a DECT handset must be configured and
the
Internal
directory set up. Perform the following:
1. From Start | Programs | IP Office, open the
Manager
application. The
default password for Administrator is
Administrator
, however this
must
be changed as early as possible.
2. Open the Configuration Tree (File/Open). The default password for the IP
Office configuration is
password
, however this password
must
changed
as early as possible.
CAUTION:
This password
must always be
entered into the DECT
Configuration menu regardless of whether or not the DECT
is slaved to a desktop phone (
see page 36
).
3. In the Configuration Tree, open
User
to display all available Users.
4. For each analogue port assigned to a DECT handset, right click in the
User
icon and select
Edit.
5. In
the
User
tab enter both a
Name
and
Full Name.
These names should
be unique to each DECT handset and will represent the
Internal
directory.
6. Select the Voicemail tab and ensure that:- When voicemail for the
DECT is required that the
Voicemail On
box is ticked.
- Where voicemail for the DECT or the DECT is to be slave of a desktop
phone (
see page 36
), that the
Voicemail On
box is empty.