Avaya CallPilot 703t, Hardware Installation, Page: 40 / 52

To connect the mouse, keyboard, and monitor to the server
1. Place the monitor, keyboard, and mouse in the same location as the server.
2. Plug the keyboard and mouse into the appropriate PS/2 connectors on the chassis
rear panel. See the diagram on Rear panel on page 39.
3. Plug in the monitor connector. Tighten the screws on the connector.
4. Ensure that a single-point ground reference is available for all the power outlets
serving the CallPilot server and its peripherals. Before the CallPilot server
installation, a qualified electrician must implement the single-point ground reference
requirement between the power outlets of the CallPilot server and the power outlets
of the switch.
Installing the server and connecting the peripheral devices
40 Avaya CallPilot® 703t Server Hardware Installation December 2010