Avaya 3920, Installation Manual

Page: 34 / 60

4 Installing a Repeater
34 Installing a Repeater in a Normal Configuration
Planning and Installation Guide
maintaining a “good” signal, or just inside the location where the signal became
weaker.
If you are installing multiple repeaters, perform this procedure for each repeater.
Figure 13:
Mapping the Coverage Area of a Base Unit
After you map the coverage area of the base, go to “Testing the Location” on
page 35 .
Base
Install the repeater
inside the “good”
signal range, before
the noise increases
Good signal
(no noise)
During a call,
walk away from
the base
Weak signal
(noise increasing)
No signal
As the
signal
weakens,
the noise
increases