Avaya 3920, Installation Manual

Page: 30 / 60

4 Installing a Repeater
30 Installing a Repeater in a Normal Configuration
Planning and Installation Guide
Installing a Repeater in a Normal Configuration
This section describes how to install and configure a repeater in a normal
configuration (that is, not a daisy-chain configuration). You must perform the
following steps:
1
Register the repeater. See “Procedure 1: Register the Repeater” on
page 30 .
2
Find the right location for the repeater. See “Procedure 2: Find the Right
Location” on page 33 .
3
Install the repeater. See “Procedure 3: Install the Repeater” on page 35 .
Procedure 1: Register the Repeater
Before installing a repeater, you must activate the repeater mode on the base
unit of an Avaya 3920 Wireless Telephone and then register the repeater to the
base unit and any handsets. Before you start the registration process, be sure
you have
:
•
A working base
•
A working handset registered to that base
• Any repeaters you want to register to this base. (You must complete the
registration process separately for each repeater.)
Perform one of the following steps:
• If you are registering only one repeater to the base of an Avaya 3920
Wireless Telephone, go to “Registering a Repeater Automatically” on
page 31 .
• If you are registering more than one repeater to the same base of an Avaya
3920 Wireless Telephone, go to “Registering a Repeater Manually” on
page 31 .