Avaya 3735 User Manual Download

Page: 85 / 135

(Optional)

If required enter values in the fields. This is applicable to only some of the

fields.

9. Press

Back

Editing My favorites

Procedure

1. Mark the name in My favorite by pressing the navigation key up and down.

2. Press

More

3. Select

Edit

4. Edit the parameters.

5. Press

Back

Deleting My favorites

Procedure

1. Mark the name in My favorite by pressing the navigation key up and down.

2. Press

More

3. Mark

Delete

by pressing the navigation key up and down.

4. Press

Select

5. Press

Yes

Managing messages

Message List

The thirty last received messages are stored in a list. The message list is located in the

Messaging

Inbox

. Time and date information is included in the message. If a message is

received when the inbox already contains thirty messages, the message in the inbox with the

oldest time and date is automatically replaced by the newly received message.

Managing messages

August 2019

Using 3735 DECT handsets with Communication Manager and IP Office

Comments on this document? [email protected]

Summary of Contents for 3735








































































































































Search results

Summary of Contents for 3735

Reviews:

Related manuals for 3735

Brands by name

Popular brands

Avaya 3735, User Manual

Search results

Summary of Contents for 3735

Reviews:

Related manuals for 3735

Brands by name

Popular brands