Avaya 3735 User Manual Download

Page: 59 / 135

A list of predefined message template is displayed.

4. Navigate to the required message template and press the

Select

soft key. If required you

can edit the message.

5. Press the soft key

Send

The message sender’s number is displayed in the handset display.

6. Press the soft key

Send

"Message sent"

confirmation is displayed and the message is sent to the caller.

Managing call list

Call list

You can see the last 25 received, dialled, or missed calls that are stored in the call list. If a phone
number occurs more than once, the last time stamp and the total number of occurrences are
listed. From the menu, you can see call list under

Calls

Call list

Editing a number from the call list

Procedure

1. Press

Menu

2. Select

Calls

3. Select

Call list

4. Select a number from the call list.

You can scroll the call list with the up and down arrows on the navigation key.

5. Press

More

6. Select

Edit number

to edit the selected number.

Saving a number from the call list

About this task

Saving a number in the call list creates a new contact. However, existing items in the call list are

not updated with the contact information.

Managing call list

August 2019

Using 3735 DECT handsets with Communication Manager and IP Office

Comments on this document? [email protected]

Summary of Contents for 3735








































































































































Search results

Summary of Contents for 3735

Reviews:

Related manuals for 3735

Brands by name

Popular brands

Avaya 3735, User Manual

Search results

Summary of Contents for 3735

Reviews:

Related manuals for 3735

Brands by name

Popular brands