PARTNER Version Installation Manual
Page 113
- Issue 1c (09 April 2010)
IP Office Essential Edition
System Component Details: Expansion Modules
IPO 500 Phone Connections
Ports
Description
DC I/P
DC power input port. Used for connection of the power lead from an Avaya earthed 60W external power
supply unit supplied with the expansion module. A locale specific IEC60320 C13 power cord for the
external PSU is required but is not supplied with the module.
DTE
9-Way D-Type socket. For Avaya use only.
EXPANSION
RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
Expansion Interconnect cable supplied with the module.
PHONE
RJ45 socket. Used for connection of analog phones. Intended for two-wire analog phones. For
connection to 4-wire analog phones connection should be via a master socket with ringing capacitors.
If connected to an
out-of-building extension
, the connection must be made via additional
IP Office
Barrier Boxes
in addition to the buildings primary protection. The module must also be connected to a
protective ground.
Protective Ground point. Use of a protective ground is required for all installations, see
Grounding
(Earthing)
. Where the module is connected to analog extensions in another building, an IP Office Phone
Barrier Box V2 (101V) is required at both ends, see
Lightning Protection/Out-of-Building Connections
.
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system.
Item
Variant
Country
SAP Code
IPO 500 Phone
16 Ports
All
700449507
30 Ports
All
700426224
IEC60320 C13 Power Cord
CEE7/7
Europe
700289762
BS1363
United Kingdom
700289747
NEMA5-15P
America
700289770
IP500 Rack Mounting Kit
All
700429202
Expansion modules include an external power supply unit (PSU) and an appropriate interconnect cable. They do not
include a locale specific power cord for the external PSU or any phone extension cables.
