Avari Fitness A550-175, Owner'S Manual

Page: 13 / 34

Bottom View
Nut
ASSEMBLY INSTRUCTIONS
Socket of
Power Wire(74)
13
STEP 14
Refer to the Bottom View below. Attach the SEAT(103) to the SEAT SLIDER(102) by inserting the connector
of the SEAT SLIDER(102) into the SEAT(103) and lock in position by tightening the NUT(M8x1.25). Pull
the
ADJUSTMENT KNOB(101),
then insert the
SEAT POST(100)
into the
MAIN FRAME(1)
and secure
with the ADJUSTMENT KNOB(101).
NOTE: The pin of the ADJUSTMENT KNOB(101) must be inserted into one of the adjustment holes in
the SEAT POST(100) and the ADJUSTMENT KNOB(101) must be screwed in tight to ensure that
the SEAT POST(100) will fit securely in the MAIN FRAME(1).
With the SEAT(103) attached to the SEAT SLIDER(102), and the SEAT POST(100) attached securely
to the MAIN FRAME(1), adjust the SEAT(103) to a level position. Loosen the NUTS(M8x1.25) under the
SEAT(103),
and raise or lower the front of the
SEAT(103)
until the top of the
SEAT(103)
is parallel to the
floor. Make sure that the seat points straight forward and securely re-tighten the NUTS(M8x1.25).
STEP 15
Plug the
ADAPTER(98)
into the
SOCKET
of the
POWER WIRE(74)
located on the back of the unit. Plug
the ADAPTER(98) into an electrical outlet.