ASSEMBLY INSTRUCTIONS
11
STEP 9
There is a
“R”
decal on the
RIGHT PEDAL CAP(78),
and a
“L”
decal on the
LEFT PEDAL CAP(79).
Attach the
RIGHT PEDAL CAP(78)
to the
PEDAL ARM(5)
on the right side with the
LOCKING KNOBS(77),
WASHERS(M10)(63),
and
CARRIAGE BOLTS(M10x1.5x50mm)(45).
Repeat on the left side.
NOTE:
You can loosen the
LOCKING KNOBS(77)
to adjust the
PEDAL CAPS(78, 79)
to the front or
back. Securely tighten the
LOCKING KNOBS(77)
after adjustment. Always set the
PEDAL CAPS
(78, 79)
at the same position on both sides.
STEP 10
Plug the
EXTENSION CONTROL WIRE(28)
and
PULSE CONNECTION WIRES(29)
into the
COMPUTER(25),
and push the excess wires back into the
UPRIGHT(4).
Attach the
COMPUTER(25)
to the plate on the
UPRIGHT(4)
with
ROUND HEAD SCREWS(M5x0.8x10mm)(94).
NOTE:
Be careful not to damage the wires when attaching the
COMPUTER(25)
to the
UPRIGHT(4).
C.
D.
L
R
Summary of Contents for A550-175
Page 30: ...PRODUCT PARTS DRAWING 30 FRONT BACK...
Page 33: ...NOTES 33...
