Place the
AVARI® Conversion II Rower Recumbent Bike
in the area where it will be used. It is
recommended that the
AVARI® Conversion II Rower Recumbent Bike
be placed on an equipment
mat. The
AVARI® Conversion II Rower Recumbent Bike
is approximately 77 inches long x 23 inches
wide x 33.5 inches tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 8.5 feet
long is required for safe operation of the
AVARI® Conversion II Rower Recumbent Bike.
Make sure
that adequate space is available for access to and passage around the
AVARI® Conversion II Rower
Recumbent Bike.
LEVELING:
Adjust the location of
AVARI® Conversion II Rower Recumbent Bike
so the bike sits on
the floor without rocking.
MOVING:
The
AVARI® Conversion II Rower Recumbent Bike
has a pair of
MOVING WHEELS(76)
on the
FRONT STABILIZER(2).
Grasp the
RAIL CAP(55)
to move the
AVARI® Conversion
II Rower Recumbent Bike.
FUNCTION INSPECTION:
Visually inspect the
AVARI® Conversion II Rower Recumbent Bike
to verify that assembly is as shown
in the above illustration. Check the function of the
AVARI® Conversion II Rower Recumbent Bike
by
turning the crank slowly through one complete revolution to verify that the drive train functions properly.
Adjust the
TENSION KNOB(27)
and verify that it functions properly.
CAUTION:
Locate and read the
CAUTION LABEL(115)
on the
AVARI® Conversion II Rower
Recumbent Bike.
Make sure that all users read the
CAUTION LABEL(115)
before using the
product.
SET UP INSTRUCTIONS
12
Equipment Mat
(not included)
Meijer.com
