User Manual
Product Description
All models consist of a plastic lined, insulated
hopper mounted to a metal base. The hopper
contains a 15 blade plastic dispense wheel and a
stainless steel sweep arm. The top front of the
hopper has a removable door to facilitate
maintenance and cleaning of the hopper without
removal of the ice machine.
The dispense wheel and sweep arm rotate when
the dispense drive motor is actuated. The drive
motors actuation is controlled by the agitation timer
or the vend switch. When the ice dispense chute is
pushed back it moves the actuation lever up. The
actuation lever releases the chute door and
pushes the vend switch arm up. When the vend
switch arm has moved a preset distance the vend
switch contacts close, providing power to the
dispense drive motor. Ice is delivered to the top
end of the ice chute by the dispense wheel and it
slides down the chute to the container below.
The container rests on a grill, the grills
openings are over the ice catch pan,
and any spilled ice goes there. The
grill has a
e at the front to help
contain the ice i t spills during vending.
After the ice dispense chute is
released, the ice chute door closes to
stop ice
w. Ice in the chute will
eventually melt. Melted ice water
is routed to the drain through a
hose attached to the bottom of
the chute. Spilled ice is
contained in an insulated ice
catch pan. Melted ice water
from the ice catch pan is
routed to the drain. User
debris is kept away from the
drain in the catch pan by a
slotted shield.
The side and front exterior panels are
stainless steel. The vending area and
top panel are made of plastic.
Bin
Vend Switch
Chute Door
Chute
Drive Motor
Ice Catch
Pan
Sweep
Arm
Dispense
Wheel
Drain Hose
to Ice
Catch Pan
Drain Hose
-
2
6
-
