-
1
2
-
User Manual
4. Cleaning: During the normal operation, hold the cleaning button for 3 seconds to enter the
cleaning process. During the entire cleaning process, cleaning agents and disinfectants need
to be put into the water trough. When the cleaning process is finished, the ice maker will go to
the ice making process.
Note: All cleaning and sanitizing chemicals used must be nickel safe
5. ON/OFF: Press this button to switch the machine OFF/ON.
6. Please open and close the storage bin door gently. Do not slam the door. Keep door closed
when not removing ice.
7. If the ice maker is not in use for a long time, it should be energized and run for 2 to 4 hours
every 2 months.
Other Special Protection - Shutdown
• If the ice machine has not detected ice harvest in three cycles, it will shut down for safety
and protection. The ice maker needs to be checked.
• If the ice machine detects that the ambient temperature is too high it will stop for safety
and protection.
• The fault code and its comments are displayed as follows:
User Manual
