-
10
-
User Manual
Operation Instructions
• Startup:
after proper installation, connect the water source and turn on the power supply to
turn on the machine. Please confirm that the machine is operating normally when you turn it
on for the first time.
• Self-check:
with power on for the first time, the ice maker will do a self-check and pump out
any remaining water.
• Preparing:
after the ice machine has finished the self-check, the inlet valve opens and the
inlet water will flow in until it reaches the set level; then the ice maker will defrost one time.
• Ice making:
after pre-cooling for 30 seconds, the water pump starts, the water flows through
the evaporator smoothly and evenly, the ice cubes are gradually formed in the ice cube tray.
• Ice Harvest (Drop):
after the ice making process finishes and the water pump is turned off,
the defrosting valve is turned on. After the hot gas enters into the evaporator for about 1-2
minutes the ice cubes slide from the evaporator into the storage bin.
Warning: Do not put your hand into the ice storage bin during the ice-falling process to
prevent the ice from hitting your hand!
• Shutdown:
The ice maker will stop working when you push the “on/off” button on the control
panel during the running process.
• Bin full stop:
when the ice machine is running and the storage bin gets filled to the machine’s
•
sensor, the machine will take 40 seconds and then stop producing ice.
• Repeat ice-making:
when the ice cubes that are triggering the sensor are spread out or
moved, the ice maker will go back to the ice making process in a few seconds.
User Manual
