Avantco Equipment 177CMA1B, User Manual

Page: 4 / 13

User Manual
4 www.AvantcoEquipment.com
Installation
As stated in the warranty, poor water quality will void warranty. Whenever
installing new plumbed in equipment, water should be tested and new
water filtration catridge/system installed by a certified technician. Avantco
recommends item 790OCLOKITL from C Pure
1. Position the brewer on a sturdy, level surface.
2. Connect the brewer to a water source with a water
pressure between 20 and 90 psi using a ½” connection
3. Plug the brewer into a power source with the correct
voltage.
4. Place empty glass decanter or airpot under the funnel.
5. Turn the brewer on and press the brew button
6. The filling indicator will light up
7. Hot water should start to flow into the pot after
approximately 30 sec
8. Repeat steps 4-7 twice to clean the internal parts of
the brewer before brewing coffee for the first time.
#790OCLOKITL
C Pure Oceanloch-L Water Filtration
System - 1 Micron Rating and 1.67 GPM