AVANT A2971, Operator'S Manual For Attachment

Page: 18 / 26

18 (26)
If your loader is equipped with a telescopic boom, you can utilize it for a better view to the working area.
Set the loader engine rotating speed according to the material being handled and operating conditions.
Moderate engine rpm are usually enough to rotate the broom adequately so that the broom sweeps the
material neatly to its side. On 600- and 700-series loaders one or two working hydraulic pumps may be used
according to operating conditions. High rotating speed will wear down the brush more quickly and typically it is
not necessary to use high rotating speeds.
To prevent damaging the bristles, do not drive with the loader keeping the broom on the
ground without rotating it.
Operate the attachment keeping the hydraulic flow within recommended range. Never
exceed maximum allowed input of hydraulic energy.