AVANT A2971, Operator'S Manual For Attachment

Page: 17 / 26

17 (26)
6.3 Operating the broom
To rotate the broom:
Move the auxiliary hydraulics
control lever of the loader towards
its locking position (or use the red
button of the electric joystick) to
rotate the broom
counterclockwise.
Stop the attachment by releasing
the lever to neutral position.
Move the auxiliary hydraulics
control lever of the loader to
reverse direction to rotate the
broom clockwise.
Stop the attachment by releasing
the lever to neutral position.
Check the position of the storage support before using the attachment. Always lift the
storage support (tilt backwards) before using the broom. See instructions in this manual.
Correct operating position
Before starting the broom, place it to the working position:
1.
The Carousel broom works in the most efficient way, when it is kept tilted in slightly forward tilted
position, as shown in figure below. It is important to keep the broom in tilted position in order to swipe
material efficiently.
2.
Tilt the quick coupling plate forward, so that the broom can float. See more information about the
floating system in this manual
When a suitable position is adjusted, lift the loader boom by operating the boom control lever only
longitudinally. In this way, the correct position is maintained, when lowering the attachment.