13(12)
Going or reaching under a lifted trailer bed causes hazards of crushing and getting
trapped under the lowering trailer bed. The trailer must be lowered completely before
any maintenance work. Never go or reach under a tipped trailer.
Ejected oil may cause serious injuries. Do not use
the equipment if you have discovered a fault in
the hydraulic system. Never tighten a hydraulic
fitting that is under pressure, since the fitting may
break and cause ejection of oil.
7.1.
Storage
The trailer should be protected from rain during storage. Protect the drawbar and locking separately. Water
must not be let to stay in th trailer to ensure long service life of the hed plate and the metal structures.
Support the trailer carefully for storage and prevent unauthorized use. Place, for example, blocks of wood
under the supporting jack, so that it is in direct contact with the ground.
Before long storage periods touch up the paint finish or oil the visible metal surfaces and the cylinder shaft.
Lubricate the trailer thoroughly as instructed below. During long storage periods, the tires may bend. Ensure
suitable tire pressure and move the trailer regularly a little.
7.2.
Lubrication
There are a total of 7 lubricating points on the trailer, to which a small amount of grease should be added
after about every 10 hours of use. On demanding and dirty conditions the lubrication must be done more
often.
In addition to the lubricationg points, the towing hitch should be also greased regularly. A small amount of oil
should be added to the side panel lockings.
Drawbar jack
Tipping hinges
Summary of Contents for A21200
Page 16: ......
