Installing Your Window Kit and Exhaust Hose- con nued
INSTALLATION IN A SLIDING SASH WINDOW
1. Cut the foam seal to the proper length and a ach it to the window frame.
2. A ach the window slider kit to the window frame. Adjust the length of the window slider kit according to the
height of the window. Shorten the adjustable window kit if the height of the window is less than 26.5 inches. Open
the window sash and place the window slider kit on the window sill against the frame securely.
3. Cut the foam seal to the proper length and a ach it on the top of the window slider kit. Close the window sash
securely against the window slider kit.
4. Finally, cut the foam seal to an appropriate length and seal the open gap between the top window sash and outer
window sash.
INSTALLATION OF EXHAUST HOSE
The exhaust hose and adaptor must be installed or removed in accordance with the usage mode.
Install for COOL and AUTO mode, remove for FAN or DEHUMIDIFY mode.
1. Install the window exhaust hose adapter as shown below.
2. Push the Exhaust Hose into the air outlet opening along the arrow direc onal.
Notes about the exhaust hose:
•
The exhaust hose can be extended but it is recom-
mended to use the shortest length possible.
•
Make sure there are no kinks or bends where ex-
hausted air could get trapped causing your portable
air condi oner to overheat and shut itself o
ff
.
•
Do not lengthen hose by adding any addi onal
hoses or a achments.
